Sparkling wine pressure tanks - Gortani - Tecnologie avanzate per la vitivinicoltura

Sparkling wine pressure tanks - Gortani - Tecnologie avanzate per la vitivinicoltura: COMPLIANCE WITH 2014/68/UE (P.E.D.) Working pressure: 6, 9, 12 Bar and overVertical axis tank in AISI 304 stainless steel with test certificateRounded top/bottom floorSupporting stand with adjustable feetStructure and components welded using T.I.G./M.I.G. in an Argon-protected atmosphere by means of NC and electronic machines.Insulating external finish: patterned finishShell internal finish: polishedFloor internal finish: polishedStandard accesoriesn° 1 elliptical door measuring 520x410 mm PED opening inwardsn° 1 stainless steel valve for partial discharge MG DIN 50 / FE DIN 50 fitting n° 1 stainless steel valve for total discharge MG DIN 50 / FE DIN 50 fitting Suitably sized cooling pocketsn° 1 Ø 20 mm dip stick with “Cristal” tube and DN 20 tank fittingsn° 1 DN20 curved Ø 22 mm sampling tapn° 1 digital liquid crystal thermometer, scale -20 +70 °Capplied to the 1/2” couplingn° 1 temperature probe well located at the back of the tank, with 1/2” couplingn° 1 pressure piping from the top of the lid at working height,complete with instrument holding unit, 6.0 Bar gauged safety valve,glycerine bath manometer Ø 100, scale 0-10 Bar and 3/4” discharge valven° 1 fitting for future arrangement of CO2 porous plug applied to the bottom floorn° 1 FE DIN 50 fitting applied to the shell and tilted by 10° downwards,with associated socket for agitatorn° 1 FE DIN 100 fitting applied to the top floor with associated socketn° 2 lifting eyeboltsAdjustable feet by means of screws and supporting standsThermal insulation by means of sealed coating of the entire external surface with polyurethane foam, covered with patterned and riveted stainless steel sheets.All fitting outlets (couplings, nozzle and tubes) are fitted with riveted washers. Installation of AISI 304 stainless steel doorframe with quick-release closure, conical internal frame, rectangular external frame.Optional accessoriesWelded stainless steel lining systemHeating vessel with 3.0 kW heater (up to 30 HL incl.)Heating vessel with 6.0 kW heater (from 30 HL)Permanent agitator (with flanged fitting on tank)Removable agitator with removable propellerWashing system by means of sprayballPorous plug. tanks, vats, autoclaves, cooling circuits, systems stairs and walkways

Back

Sparkling wine pressure tanks

COMPLIANCE WITH 2014/68/UE (P.E.D.)


Working pressure: 6, 9, 12 Bar and over
Vertical axis tank in AISI 304 stainless steel with test certificate
Rounded top/bottom floor
Supporting stand with adjustable feet
Structure and components welded using T.I.G./M.I.G. in an Argon-protected atmosphere by means of NC and electronic machines.

Insulating external finish: patterned finish
Shell internal finish: polished
Floor internal finish: polished

Standard accesories

n° 1 elliptical door measuring 520x410 mm PED opening inwards
n° 1 stainless steel valve for partial discharge MG DIN 50 / FE DIN 50 fitting 
n° 1 stainless steel valve for total discharge MG DIN 50 / FE DIN 50 fitting 
Suitably sized cooling pockets
n° 1 Ø 20 mm dip stick with “Cristal” tube and DN 20 tank fittings
n° 1 DN20 curved Ø 22 mm sampling tap
n° 1 digital liquid crystal thermometer, scale -20 +70 °C
applied to the 1/2” coupling
n° 1 temperature probe well located at the back of the tank, with 1/2” coupling
n° 1 pressure piping from the top of the lid at working height,
complete with instrument holding unit, 6.0 Bar gauged safety valve,
glycerine bath manometer Ø 100, scale 0-10 Bar and 3/4” discharge valve
n° 1 fitting for future arrangement of CO2 porous plug applied to the bottom floor
n° 1 FE DIN 50 fitting applied to the shell and tilted by 10° downwards,
with associated socket for agitator
n° 1 FE DIN 100 fitting applied to the top floor with associated socket
n° 2 lifting eyebolts
Adjustable feet by means of screws and supporting stands

Thermal insulation by means of sealed coating of the entire external surface with polyurethane foam, covered with patterned and riveted stainless steel sheets.
All fitting outlets (couplings, nozzle and tubes) are fitted with riveted washers. Installation of AISI 304 stainless steel doorframe with quick-release closure, conical internal frame, rectangular external frame.

Optional accessories

Welded stainless steel lining system
Heating vessel with 3.0 kW heater (up to 30 HL incl.)
Heating vessel with 6.0 kW heater (from 30 HL)
Permanent agitator (with flanged fitting on tank)
Removable agitator with removable propeller
Washing system by means of sprayball
Porous plug

Note: the fields with * are required